- 1). Heat up the car's logo with a hair dryer until it easily comes off the car's body.
- 2). Take the logo to be painted to a hobby store. Look for model paints that match the original colors on the logo.
- 3). Remove any loose pieces of paint with your fingernails. If you have trouble removing loose pieces of paint, apply paint stripper to loosen them.
- 4). Rub the entire surface of the logo with paint thinner, then wipe the paint thinner off with a fresh cloth. Let the logo dry, then wash it clean with soap and hot water. Dry the logo with a towel.
- 5). Dip the paintbrush into the paint, then let it drip tiny drops onto the logo. If the paint is not thin enough for it to drip from the tip of the brush, add paint thinner until it does.
previous post
next post