- 1). Remove the contents of your StreetGlow kit package. Organize the contents so that each piece is easy to locate.
- 2). Pull the adhesive covers off the back of the light strips, and place them, as desired, under the vehicle. Try to spread them around the bottom of the vehicle along all the edges as evenly as possible.
- 3). Run all of the power wiring from each of the light strips up through the vehicle, to the battery. Secure the wiring every several inches with electrical tape. Also, make sure not to run the wiring near any hot pieces of equipment in the motor.
- 4). Crimp the end of all the wires, and splice the ends together.
- 5). Wrap the ends around the positive and negative posts on the vehicles battery, and tape them with electrical tape to secure them.
previous post
next post