- 1). Press the "Menu" button on the 4100E control panel.
- 2). Use the keypad on the control panel to key in the following, which puts the fax machine into maintenance mode: *2864
- 3). Enter "10" on the control panel keypad, which puts you in the firmware menu.
- 4). Enter "22" on the control panel keypad to access the WSW22 menu.
- 5). Press "1" on the control panel keypad and then press "1" again to turn off ECM when sending faxes. Press "9" to go back to the WSW22 menu.
- 6). Press "2" on the control panel keypad. Then, press "1" to turn off ECM when receiving faxes. Press "99" to save and exit maintenance mode.
previous post