- 1). Park your Camaro and turn off the engine. Open the vehicle's hood and disconnect the negative battery cable from the battery, using an appropriate size metric socket.
- 2). Open the glove compartment, located on the passenger side of the dashboard.
- 3). Remove the small bolts securing the glove compartment housing to the dashboard, using an appropriate size metric socket. Certain bolts that secure the glove box housing to the dash may require the use of a ratchet extension.
- 4). Lower the glove compartment assembly down enough to gain access to the rear side of the liftgate switch, mounted on the left side of the glove compartment housing.
- 5). Disconnect the wiring harness connected to the rear of the liftgate switch.
- 6). Squeeze the locking tabs on both sides of the switch, while pushing the switch through the front side of the mounting hole. If you have difficulty squeezing the locking tabs with your fingers, use pliers for an added advantage.
previous post
next post