- 1). Take a look at the back of the DVD deck. In the center you should see a bolt hole. This is for the mounting bolt. Around the back of the DVD deck you will see electrical terminals for wiring harnesses to be plugged into. They are likely to be grouped. There will be one group for accessories like external screens, one group for speakers, an antenna jack, and a group for power and switching---like power supply and raising and lowering the antenna.
- 2). Slide the mounting bolt into the bolt hole you identified. If there's a rubber cushion in the kit, add it.
- 3). Make the electrical connections. The black lead is a ground and should screw to the car's chassis. The yellow one is for bypassing the ignition switch, so it should go to the un-switched fuse block. Red is switched, so it goes to the accessory side of the fuse block.
- 4). Connect any accessories like a power antenna (blue) and other toys like extra screens. Follow the instructions that come with the accessories.
- 5). Assemble the DVD player deck to the kit. The DVD player main unit goes in the sleeve. The trim plate acts as the joiner for the dash and the assembled deck and kit. Use the bendable tabs to hold the sleeve to the DVD player deck. Slide it all into the dash, and from behind, screw the mounting bolt to a bendable perforated stay. Use a self-tapping screw to screw the stay to the fire wall.
previous post
next post