- 1). Open your trunk, enter your car and make sure all of your doors are closed behind you.
- 2). Insert your key into the ignition and turn it to the "ACC" position.
- 3). Turn the key "Off" again, then back to "ACC," and open and close your driver's side door.
- 4). Wait for a chime to sound and press and hold the Lock and Unlock buttons on your keyless remote.
- 5). Wait for a chime after seven seconds, and continue holding the buttons for another seven seconds until another chime sounds. This will end the programming sequence and you can remove the key from the ignition.
previous post