- 1). Turn the window operator handle to open the jalousie louvers fully or to where the glass slats are nearly level.
- 2). Lift the frame clips at each side of the broken or cracked louver upward with your thumb, then slide the slat toward you to remove it. Use the tip of a screwdriver to lift the clips if thumb pressure doesn't free the louver.
- 3). Clear any broken pieces of glass from the frame channels on both sides using the tip of a screwdriver.
- 4). Position the lower edge of the new louver against the frame clip on both sides, then press the top of the louver to insert it into the frame channel on both sides until the frame clips snap over the top edge of the louver.
- 5). Turn the window operator handle counterclockwise to close the window louvers.
next post