- 1). Find the battery on the passenger's side, just in front of the windshield wiper fluid reservoir.
- 2). Remove the handle that covers the battery and take off the ground wire. Remove the cable ends from the battery terminals with a battery terminal puller.
- 3). Lift the battery out of the compartment. Use the wire brush to clean the surface that holds the battery. Clean the insides of the connector cables with a pointed wire brush. Keep your gloves on at all times to avoid getting acid on your hands.
- 4). Rinse off the cables and battery tray or wipe with a damp cloth, and let them dry out.
- 5). Place the new battery on the shelf. Place the correct cable on each terminal and tighten securely with pliers or a socket wrench. Replace the battery holder and cover.