- 1). Insert the key into the ignition of your Road Star. Turn the key counterclockwise until the seat latch clicks to release the seat. Push down on the front of the seat with your free hand to release the seat lock, then lift the seat off the bike.
- 2). Pull the strap around the battery off the latch that secures it. Remove the latch from the tray and remove the retaining strap. Disconnect the negative battery cable from the terminal with a screwdriver. Remove the positive battery cable from the terminal with a screwdriver. Lift the battery out of the tray and set it aside.
- 3). Insert the new battery into the tray. Replace the retaining strap and lock it into place on the clip at the base of the tray. Reconnect the positive battery cable, tightening it with a screwdriver. Reconnect the negative battery cable, tightening it with a screwdriver.
- 4). Replace the seat on the bike, pushing it into place until it locks. Turn the key clockwise to the “OFF” position and remove it from the ignition.
previous post
next post