- 1). Sit inside of your car and close and lock all of the doors and trunk, except for the driver's door, which you will open and unlock.
- 2). Insert and remove the key from the ignition twice. Close and open the door twice. Insert and remove the key from the ignition again and close and open the door two more times.
- 3). Put the key into the ignition again, close the door, turn the key "On" and then "Off" and then remove the key again.
- 4). Wait for the locks to cycle. Press and hold the lock and unlock buttons on your remote for two seconds.
- 5). Release the two buttons and press and hold just the lock button for approximately three seconds and wait for the locks to cycle to indicate successful programming. Remove the key from the ignition to end the programming.
previous post