- 1). Squeeze two lines of hot glue lengthwise along the piece of cardboard.
- 2). Place two pipe cleaners onto the hot glue. Allow the hot glue to cool completely.
- 3). Cut three pipe cleaners into sections. Make each section equal the length in between the two pipe cleaners that are glued to the cardboard.
- 4). Squeeze lines of hot glue in between the two pipe cleaners that are glued to the cardboard. Space the lines of hot glue out evenly.
- 5). Place the pipe cleaner sections onto the hot glue lines. Allow the hot glue to cool completely.
- 6). Cut three more pipe cleaners into 2 to 3 inch sections. Squeeze dollops of hot glue onto the long pipe cleaners that are glued to the cardboard.
- 7). Place the ends of the pipe cleaner sections onto the hot glue dollops. Make sure that the pipe cleaner sections are standing up vertically. Allow the hot glue to cool completely.
- 8). Apply a dollop of hot glue onto te other end of each pipe cleaner section. Drape two more long pipe cleaners across the upright pipe cleaner sections. Allow the hot glue to cool completely before displaying your pipe cleaner bridge.