- 1). Create a design for your pens using a word processor or graphics software.
- 2). Gently wash each pen with a damp cloth and dry with paper towels.
- 3). Load your printer with a sheet of rub-on decal paper, make sure that the matte side will be printed on.
- 4). Set your print resolution to high, and select "Photo Gloss" as the paper type.
- 5). Print your design and use a tissue to carefully blot away any excess ink.
- 6). Trim the adhesive paper to a size that is a little larger than the image, and remove the backing.
- 7). Stick the adhesive paper on top of the printed decal, slowly pressing it down from one corner to the next to avoid creating air bubbles.
- 8). Cut out the decal, staying as close to the edge of the image as possible.
- 9). Peel off the adhesive paper and press it down onto the surface of the plastic pen. Rub the back of the paper firmly with a popsicle stick.
- 10
Grab hold of the corner of the paper and gently peel it away, leaving your decal on the pen.
previous post
next post