- 1). Lay the door out on the sawhorses with the bottom edge toward your power source.
- 2). Measure and mark the height you need to remove; check your measurements again before proceeding.
- 3). Score the length of your cutting line with a utility knife, using a straightedge to ensure a straight, clean score.
- 4). Turn the door over and repeat the measuring and scoring process on the opposite side of the door; this will prevent splintering when you cut the door.
- 5). Cut down the door on the marked and scored line, using a circular saw and taking care not to move above the line.
- 6). Sand the cut edge slightly to remove any burrs and roughness. Your door is now ready to rehang.
previous post