- 1). Remove the abrasive disk from the potato peeler.
- 2). Wash the disk using soap and warm water.
- 3). Dry the disk thoroughly.
- 4). Check the disk for any damage. Look for cracks and nicks in the plate. Superficial damage can be covered; deep damage may indicate that your plate needs to be replaced.
- 5). Cover your work surface for protection.
- 6). Apply a coat of a regritting resin to the plate.
- 7). Place the plate in the oven. Set the oven between 180 and 200 degrees and bake the plate for 2 hours.
- 8). Add additional coats of regritting resin as needed.
previous post