- 1). Open the rear hatch on the Trans Sport and remove the nut from the back of the wiper motor shaft using a socket wrench.
- 2). Pull the washer and seal off the back of the wiper motor shaft.
- 3). Pry the lift gate trim panel off with your fingers.
- 4). Remove the power connector running to the wiper motor.
- 5). Remove the two screws holding the wiper motor in place.
- 6). Lift up on the wiper motor and pull it off the rear hatch and lift gate assembly.
- 7). Install the new wiper motor. Installation is the reverse of removal.
next post