- 1). Enter the Jeep Wrangler and locate and remove the soft top snaps located on the frame. The snaps are above the center roll bar. Upon exiting the Jeep, unsnap those located above the front doors. Walk to the rear of the Jeep and unsnap those located on the frame above the tailgate.
- 2). Lift the plastic strips from the retainer on the rear passenger window, then unzip the zippers on the opposite sides of the plastic strips. Repeat on the other window. Set the windows aside.
- 3). Unsnap the forward snap on the driver's door. Lift the plastic strip from the retainer; this is located on the door as well. Lift the window from the grommets on the door and set aside. Repeat on the opposite side. This step is to be skipped if there are full steel doors.
- 4). Raise the tailgate bar, then move to the plastic strips on either side of the bar and lift from the retainer. Unzip the top and both sides of the rear window and set it aside.
- 5). Flip the soft top up and over the windshield with completely remove the soft top from the Jeep Wrangler.
previous post