Cars & Vehicles Auto Parts & Maintenance & Repairs

How to Troubleshoot a Car Check Engine Light

    • 1). If the car failed an emissions test, look at the code or codes provided by the emissions testing facility. Check with an auto parts store for what these codes mean. There is usually several options of what may be the problem.

    • 2). Begin with the easiest, cheapest fixes first. A check engine light may come on because of a loose hose or seal. Tighten anything that appears to be loose.

    • 3). Replace the car's air filter to see if that may remedy the problem. Open the compartment and take out the old air filter. Replace it with a new air filter. Securely close the compartment.

    • 4). Buy a bottle of fuel additive/cleaner and add it to the gas tank. Add gas so the tank is full.

    • 5). If the above actions did not make the car check engine light go off, review the list of possibilities, such as the oxygen (O2) sensor or MAF (mass air flow) sensor. These may need to be cleaned or replaced.

    • 6). Go to a repair shop that advertises they check the cause of the check engine light being on for free. There should be no charge for this diagnosis.

Related posts "Cars & Vehicles : Auto Parts & Maintenance & Repairs"

How to Remove Undercar Lighting

Maintenance

How to Replace Spark Plugs in a 2006 Dodge RAM Hemi

Maintenance

How to Install an EGR Valve on a Mazda Protege

Maintenance

Thoughts on an Oil Change

Maintenance

How to Replace the Half Shaft on a Chevy Impala

Maintenance

How to Install an ABS Relay in a Saturn VUE

Maintenance

How to Replace Alternator on a 1992 Honda Accord LX

Maintenance

How to Paint Auto Side Mirrors

Maintenance

How to Install a Radiator in a Corvette

Maintenance

Leave a Comment