- 1). Check the efficiency of your starter by seeing whether there is a delay when turning on the bed. Inefficient starters can also cause bulbs to blacken and should be changed immediately.
- 2). Unplug the tanning bed from the wall receptacle, or turn off the power to the receptacle from the fuse box.
- 3). Take off the tanning bed's acrylic encasement from both the base and lid. Use a soft cloth to wipe both sides of the acrylic.
- 4). Remove the old starter and place in the new one. Often, you can just twist the starter 90 degrees and remove it, and then replace it with a new one.
- 5). Replace the acrylic top and base. Use a cloth to remove any smudges or remaining dirt particles.
previous post
next post