- 1). Put on your safety goggles before starting your Homelite trimmer. Place the trimmer on a flat surface free of gravel or other debris.
- 2). Press the primer button at the back of the trimmer eight to 10 times. Adjust the choke lever so it is in the "choke" position.
- 3). Pull the trimmer's trigger. Pull the starter rope a half dozen times until the trimmer starts. Move the choke lever to "half choke."
- 4). Allow the engine to operate for 45 seconds with the trigger fully pulled. Adjust the choke lever to "run."
- 5). Position the choke lever to "run" if you're trying to start the trimmer after its engine has warmed up. Start the engine by pressing the trigger fully and pulling the starter rope.
previous post
next post