- 1). Allow the resin to dry for 24 hours.
- 2). Hold a quarter between your finger and thumb so that the ridges on the edge are pointing down. Scrape the resin in a sweeping motion back and forth until the resin has been broken up. Not all the resin will come off, but it will reduce in size considerably.
- 3). Spray the remaining resin with WD-40 and continue to scrape with the quarter until the surface of the car is exposed through the resin. The quarter will not scratch the paint if a thin film of resin is present.
- 4). Wipe the area off with a rag and apply an automotive bug or tar remover. Rub it in vigorously with a soft rag until the remaining resin has disappeared.
- 5). Clean the area or just wash the car completely. Apply a wax or polish.
previous post