- 1). Put on rubber gloves. Dip a sponge into the Watco oil. Saturate half of the sponge.
- 2). Apply the saturated sponge directly to the wood. Smear and spread the oil over the surface of the wood. Get more oil on the sponge if you need it to get the wood completely wet with the Watco oil. Let the oil sit on the wood for 15 minutes.
- 3). Wipe the Watco oil off with a clean, cotton cloth. Let the oil dry for 1 hour and wipe the wood off again to remove any small dots of oil that have leeched back up to the surface. Let the Watco oil dry for 72 hours.
- 4). Apply a coat of paste wax by hand with a soft cloth or spray the wood with lacquer to finish.
previous post
next post