- 1). Plug in the machine, and make sure all the vent holes are uncovered. The popper needs air to work.
- 2). Switch the kettle heat, motor and exhaust fans on. The kettle heat switch starts to warm the kettle, which is what heats up the oil the popcorn is popped in. The motor runs the agitator so the popcorn cannot burn. The exhaust fan serves two purposes, it removes overheated air from the machine, and it draws a crowd.
- 3). Place the correct amount of oil into the kettle, followed by the right measure of popcorn kernels. Close the lid on the kettle and let the machine get to work.
- 4). Rotate the handle on the kettle to dump the fresh popcorn into the bin. Salt as desired, and enjoy.
previous post