- 1). Unplug the GE washing machine. Turn off the water supply valves connected to the unit.
- 2). Loop the rope under the fins on both sides of the bottom of the agitator.
- 3). Lift the rope up to detach the agitator from the transmission hub.
- 4). Remove the bolt connecting the coupler to the bottom of the agitator with the socket wrench. Pull the old coupler off the agitator.
- 5). Position the new coupler on the agitator. Install the bolt that holds it in place.
- 6). Insert the agitator into the tub. Rotate the agitator until the coupler aligns with the transmission hub. Press down on the top of the agitator to snap it into place.
previous post