- 1). Prepare for the refill. Uncap the fountain pen, unscrew the barrel from the nib section, and uncap the ink bottle on a flat, level surface. The piston converter is attached to the nib section of the pen.
- 2). While holding the portion of the piston converter nearest to the nib with one hand, dip the nib into the ink, and use your other hand to twist the top of the converter as far as it will go in a counter-clockwise direction. This will completely flush the converter reservoir.
- 3). Twist the top of the converter as far as it will go in a clockwise direction. This will draw ink from the bottle into the converter reservoir.
- 4). Twist the top of the converter as far as it will go in a clockwise direction. This will draw ink from the bottle into the converter reservoir.
- 5). Screw the pen barrel back onto the nib section, and gently wipe excess ink from the nib with a soft cloth.
- 6). Write a few words on a piece of scratch paper to confirm that the ink flows properly from the nib.
- 7). Recap the ink bottle, and store it upright at room temperature in a dry place.
previous post
next post