- If your Whirlpool icemaker won't run, make sure that it is plugged into an outlet and that you are not experiencing a power outage. Ensure that your icemaker control knob is turned to the "On" setting. Next, check your fuses and circuit breaker. Your circuit breaker will trip if too much power is drawn from it. Try resetting it and change out any blown fuses. If none of these resolves the problem, check your indoor temperature. Your Whirlpool icemaker does not operate in temperatures below 55 degrees Fahrenheit. Raise your thermostat setting and wait for the icemaker to come back on. If it doesn't, you'll have to manually restart it.
- A high mineral content in your water can cause your ice to taste strange. Use a water filter to remove sediment from your water and have your water treated. Ensure that you have removed all of the packaging materials from your icemaker. If not, the packaging can get into your water supply or ice. Never store food items in your ice bin. The food odors or juices can leach into the ice.
- Your ice machine cannot produce a lot of ice if your indoor temperature is above 90 degrees Fahrenheit. Turn on your air conditioner to cool down your indoor air. Remove any scale buildup from your freezing system. If scale is in your water, use a filter. Clean your condenser if you see any dirt on it. This blocks airflow through your freezing system. If your Whirlpool icemaker is not producing any ice, ensure that it is turned on and make sure that your water valve is fully open. If you live at altitudes above 2,000 feet, have your icemaker recalibrated by a professional.
- The ice grid is responsible for breaking up your ice into cubes. If it is not doing its job, pull out your ice bucket and look at the grid harness plug. Ensure that it is properly connected to your icemaker. Certain Whirlpool icemakers have control panels. If your control panel is blinking, try cleaning your icemaker. This blinking is usually caused by extremely long harvest cycles. Call a technician if cleaning does not resolve the problem.
previous post