- 1). Turn off the light switch that supplies power to the bulb. If the bulb was on, wait a few minutes for it to cool down, as it will be very hot.
- 2). Remove the recessed can from the ceiling, if the MR16 bulb is in a recessed light. Grab the edge of the recessed can, and pull down with a slight twisting motion. The lighting fixture then hangs by a wire from the ceiling. Grab the ring that attaches the hanging light socket to the bulb, and pull the socket straight out to release the MR16 assembly.
- 3). Place the fixture on a counter, with the two-pin base of the MR16 bulb facing up. Grab the base of the MR16 bulb, and pull it straight out of the lighting assembly.
previous post
next post