- 1). Turn the ignition off.
- 2). Hold down all three buttons on the faceplate of the Power Commander III and turn the ignition on.
- 3). Release the buttons.
- 4). Push the button labeled "Low."
- 5). Hold the button down to make the fuel/air mixture lean. Push it repeatedly to make the mixture richer. Note that you can't make the mixture leaner than the factory settings.
- 6). Watch the two center lights. When they glow steadily, you have adjusted the idle.
- 7). Wait 20 seconds before starting the bike or turning the ignition off to save the idle setting. Verify that the setting has been saved by moving the throttle. The lights will move up and down the scale if the save was successful.
previous post