- 1
It is important to have the correct replacement belt.Thinkstock Images/Comstock/Getty Images
Ensure you have the correct replacement belt ready. Check the model number. Replacement belts are available in different sizes. - 2
Remove dustcover at hinges.Hemera Technologies/PhotoObjects.net/Getty Images
Remove dust cover from turntable. Unscrew hings and lift. - 3
Secure the tonearm.Thinkstock Images/Comstock/Getty Images
Secure tonearm to prevent stylus damage. - 4
Remove slipmat.Pixland/Pixland/Getty Images
Remove slipmat from platter. - 5
Separate the spindle from the platter by loosening with a Philips head screwdriver.Photos.com/Photos.com/Getty Images
Turn the turntable on its side and remove screws that hold the top to its base. Remove platter by unscrewing the bottom plate from the turntable. The spindle bearing is held in place with a Philips head screw. Loosen it and the platter will separate easily from the spindle. - 6
Test the replacement belt by turning the platter clockwise.Stockbyte/Stockbyte/Getty Images
Loop replacement band around the pulley cylinder in the motor. Replace platter and bottom plate. Tighten spindle screw. Test the new belt by turning the platter clockwise two or three rotations. Belt should fit snugly and turn with little resistance.
previous post
next post