- 1). Cut away the rubber weatherstripping trim from around the edge of the rear window using a sharp blade. Make an initial incision in the top of the window and cut around the edge of the window until you have cut away all of the trim. Pull the trim away with your hand and discard in the trash.
- 2). Enter the back seat of your convertible. Have someone stand outside the back of the vehicle. Press the rear window out of the frame from the inside. Have the person outside the vehicle grab hold of the window and remove it from the frame.
- 3). Use a cloth to wipe away all of the sealant which is left around the rear window frame of your convertible.
- 4). Apply a layer of urethane caulk around the edges of the window frame using a caulk gun.
- 5). Lift the new rear window in to the window frame of your convertible. Press the edges of the window against the frame to allow an initial seal to set in place. Leave your convertible for around 24 hours to allow a strong seal to set between the window and the frame.
previous post