- 1). Turn off the range breaker in your service panel.
- 2). Open the oven door, and then flip the hinge locks to the unlocked position, which is toward the oven door. The hinge locks are located on each hinge, and when located, are flush against the hinge slots.
- 3). Close the oven door to the broil-stop position, and then lift the door up and off of the range. Place the door face-down on a solid surface.
- 4). Remove the door handle screws from the top of the inner door panel.
- 5). Remove the screws at the bottom of the door.
- 6). Lift the inner door panel out of the outer door panel.
- 7). Remove the screws from the inner door panel, which secure the door hinges to the door.
- 8). Lift the inner door panel and remove the hinges.
- 9). Insert the new hinges into the door from below the inner door panel. Secure the new hinges to the panel by reinstalling the screws that were removed.
- 10
Place the inner door panel back into the outer door panel, and then install the screws at the bottom of the door. - 11
Secure the door handle to the door using the door handle screws that you removed from the inner door panel. - 12
Grasp the oven door by the sides, and insert the door hinges into the door hinge slots. Ensure that the hinges rest on the hinge pins. - 13
Open the door fully, and then lock the hinge locks by moving the up, toward the oven itself. - 14
Close the oven door, and then restore the range's power supply.
previous post