- 1). Remove the old speaker from the box, if applicable, with a drill or screwdriver. The screws can be found all around the actual speaker. Before pulling the old speaker out of the box, ensure that the wires are disconnected from the terminals in the back of it.
- 2). Connect the wires to the back of the speaker to be installed before dropping it into the box. The positive wire will normally have a bigger terminal for easy identification. If it does not, follow the wire back to its source, and identify whether the striped side of the wire is negative or positive.
- 3). Tighten the speaker into the box by reinstalling the screws around the perimeter of it. Make it snug so the speaker will not rattle around.
previous post