- 1). Attach the PocketWizard to your camera's hot shoe bracket. Turn on the device and your camera.
- 2). Attach the receiving device to the first flash unit. Set it to the same channel as the transmitting unit and turn it on.
- 3). Place the flash with the slave unit in a position so that the slave unit will be able to "see" the light from the first flash unit. Turn on the unit.
- 4). Press the "Test" button on the PocketWizard to ensure that the first flash is firing and the second flash is firing in response to the first flash. If this is not so, adjust the positions of the flashes until they react to each other.
previous post
next post