- 1). Charge the headset for at least two hours before attempting to connect it with the PS3.
- 2). Power on your PS3.
- 3). Select "Settings," "Accessory Settings" and "Register Bluetooth Device."
- 4). Open "Register Headset/Microphone/Headphones."
- 5). Set your headset to pairing mode by pressing and holding the outer button for about 5 seconds. An LED light will turn on.
- 6). Select "Start Scanning" on the PS3.
- 7). Choose the Gameshark headset from the list of in-range devices that appears.
- 8). Enter the headset pairing code, "0000," to complete the pairing.
- 9). Open the "Audio Device Settings" under "Settings" on the system.
- 10
Change your "Input" and "Output" device to the Gameshark headset. - 11
Test the headset after setting the "Input" and "Output" by speaking into the microphone.
previous post
next post