- 1). Place the pins in the top of the drapes. Place pins in the middle of each pleat and at the end of each pleat. Insert the pins between 1 ¼ inches to 1 ¾ inch from the top of the drapes.
- 2). Hook the first pin in the hook of traverse rod at the overlap area in the middle of the rod. Place each pin in the hooks of the rod until you reach the end of the rod. Leave the last two hooks for replacement purposes. Hang the other side of the drapes in the same fashion.
- 3). Pinch each pleat in the middle while pulling open on the top of the drapes to create the pleated effect. Pull on the cord to make sure the drapes open and the pleats stay in place.
previous post
next post