- 1). Open an empty soda siphon for refilling by first squeezing the soda dispensing valve to release any pressure remaining in the bottle. When no more gas escapes, unscrew the siphon head from the bottle. Remove the spent charging cylinder from the head if necessary on your model. Remove the bottle siphon tube and gasket, leaving the overfill sleeve in place. Rinse the bottle and siphon tube with warm water.
- 2). Make sure the overfill sleeve is inserted fully into the siphon bottle to maintain the correct head space. Fill the bottle with cold water. Insert the siphon tube and gasket. Screw on the siphon head.
- 3). Place a new charging cylinder in the removable cylinder holder with its neck pointing out. Screw the holder onto the piercing unit of the siphon head. Once the cylinder holder is fully engaged, don't remove it until the siphon bottle is empty unless instructed otherwise by the manufacturer.
- 4). Shake the bottle to help dissolve the gas. Dispense the soda water slowly down the side of the drink glass to preserve the bubbles.
previous post