When refurnishing your home to bring in the festival of lights, Diwali, do not ignore the importance of checking on the existing electrical house wiring. A lot of attention should be paid on the following, before you bring home one of the Best Ceiling Fans in India;
1. quality of wiring
2. the type of electric appliances that would be used
3. Quality of cables/wires and more.
Lack of attention and diligence on the same may end up in disasters and fatality; which we wouldnt want anyone to face. Hence, take care while redoing the electrical wiring, and here are a few pointers to ponder on. Please read on and be well-informed for the same.
If you are checking the internal house wiring, the RCC Slab may need to be dismantled to check for defects and problems. This could be a costly affair, but do it to be safe and treat it as an investment.
Defective wiring can bring in miseries and we do not want to even get started on that, because we all know the disastrous outcomes it can shower. Hence, only a professional or a certified electrician should be summoned for the job. He would ensure that the installations of high speed fans in India are done as per the Indian Electricity Acts and Rules. The materials for any of the wiring needs would be at par ISI specs.
Ensure that the total load is calculated keeping in mind the number of appliances which would be used at home. When the electrical house wiring solutions are being discussed and installed, the wiring should be able to bear the future load.
Isolated fuses should be done away with, and every conductor installed should perform well, especially for installing Designer Fans INDIA has.
Switch boards shouldnt be fitted any lower than one and a half metres, and horizontal wiring should be at least three metres high.
Wiring for earth should be 14 SWG only if copper is used and 4mmsq if aluminium is used
It is to the phase wire to which the fuse wire should be connected, and a neutral link should connect only to the neutral wire. Every switch at home should be connected to the conductor. Conductors should have a spec of cross sections, not more than 0.0020sqinch and a nominal area not less than 3/0.0029 inches conductors are to be stranded in nature.
If all of this sounds too technical for the layman thoughts, it would be wise to check with experts who would know of the same and deliver the best.