- 1). Park the ATV on a level surface. Allow the engine to run until it is warmed up, then turn it off.
- 2). Place the drain pan under the engine.
- 3). Remove the oil filler cap, then remove the oil drain bolt with a wrench.
- 4). Allow the oil to fully drain into the drain pan.
- 5). Reinstall the oil drain bolt, then tighten it to 17 ft-lbs (foot-pounds) with a torque wrench.
- 6). Refill the engine by adding 2.33 quarts of Yamalube or SAE oil to the oil fill tube.
- 7). Reinstall and tighten the oil filler cap.
previous post