- 1). Prepare a solution of alcohol and water in a small cup.
- 2). Wipe the screen with a lint-free cloth to clean dirt, dust and oily residue from fingerprints.
- 3). Dip the cotton swab in the diluted alcohol and gently wipe the surface of the screen.
- 4). Immediately wipe the surface clean with the cloth.
- 5). Remove the backing from the screen protector and hold the film by the edges, taking care to avoid touching the sticky side.
- 6). Carefully align the bottom side of the protector to the bottom edge of the screen and hold the protector at a slight angle away from the screen (with the side touching the edge).
- 7). Gently rub the screen protector onto the screen, using the flat side of the credit card. Remember to apply an even pressure to the film to affix it to the screen to avoid air bubbles and move from the bottom left corner to the right.
- 8). Carefully peel away that portion of the film from the screen if an air bubble forms and rub the film in place to reapply.
- 9). Release sections of the protector as you affix it to the screen but continue to hold the film away from the screen until you can rub it flat.
previous post
next post