- 1). Place the diamond plate on a clean surface. Wet a towel with gasoline and scrub the diamond plate. The gas will remove oil and any other dirt or debris that may be on the diamond plate. Allow the gas to dry before you proceed.
- 2). Apply a coat of primer to the diamond plate and allow the primer to dry. Apply another coat of primer to the diamond plate and allow that coat to completely dry as well.
- 3). Apply five coats of the aluminum paint to the diamond plate. Allow one hour of drying time between each coat.
- 4). Apply two coats of clear coat once all five coats have been applied and are completely dry. Allow the clear coat to dry between each coat. Allow the diamond plate the dry overnight.
previous post