Let us investigate at how an LCD enclosure guards TV's on Decks.

On more and more occasions an LCD enclosure is being deployed for domestic use, with them having a whole year round defense solution in the cases.

Let us look at a ordinary patio or garden installation and recognize what is looked-for.

Plasma Housing
Television
Cable Box
TV cable

First lay the LCD monitor cable from the within cable box to out of home on the terrace or veranda, wherever you decide to deploy the open-air LCD case.

Once the wires are fitted, the protecting LCD enclosure needs to be fitted to the wall and this is accomplished by utilizing the mounting openings and mounting the housing directly to the wall, or if you intend on using a ceiling bracket, make sure it is very sturdy as this will fasten to the back mount holes in the rear of the Television case.

Then fit the plasma into the housing and secure the LCD to the inner mounting structure, then setup the cooling and heating system by setting the high temperature that you require the cooling and heating to start operating, but remember  that the suggested temperature is 56 degrees Fahrenheit, for the heating we would recommend that you set the thermostat at 5 degrees then when the heat falls below this the heater will heat up the system before any harm is done with the freezing outside weather circumstances.

Then close the door to the cabinet and lock it, remembering to keep the key in a safe but accessible place.

Now your outdoor TV is set to cope with any thing the weather conditions can through at it, from snow, sleet, rain and high temperatures.