Homemade Photo Floodlight Set-up

• 1). Cut two PVC tubes into 5 1/2 foot sections.
  
  
• 2). Mix cement with water in a container according to product instructions. Add small amounts of water at a time until cement mix is wet but not soupy. Stir well and pour cement mix into coffee cans.
  
  
• 3). Cement the PVC tubing in the coffee can. The tube should protrude 5 feet out of the can. Allow to dry.
  
  
• 4). Screw in the light bulb into the clip light.
  
  
• 5). Clip the light to the PVC.
  
  
• 6). Place lights opposite the backdrop on either side of the subject.
  
  
• 7). Plug in the lights and turn them on.
  
  
• 8). Begin your photo shoot.