There can be several problems we are going to encounter with our toilet flush.
This is highly expected because as we often use the toilet flush, it can have several damages.
Though there are numbers of them, they can be very easy to repair.
Listed are the most common toilet flush problems we can have in our wash areas: · Weak flusher This is probably the most common of all the toilet problems.
There newer types of tanks that can carry more water, but still fail to perform the flush.
You might try checking the inside of the tank if it there are deposits of clay, dirt or any debris that crates the flushing problem.
Ty cleaning the entire tank and get rid of anything that shouldn't be in there.
When the toilet is a bit old, it can have some dirt and soil in the tank due to the water flow.
It can also because the cement that is used for the toilet tank is already falling off and the debris will go inside.
· Strong but Partial Flush This can be caused by the flapper valve that is already water logged that it is dropping too fast.
Try observing the flapper valve whenever you flush and see if the problem is coming from it.
The valve must stay up until 80 percent of the water is already drained from the tank.
In case it drops sooner than this, it is a sign that you need to buy a new flapper.
· Bowl water level dropping When you flush the toilet and all seem to be working properly, but then a significant amount of water has left inside the bowl.
This might be the cause of a clogged toilet.
There might be a case when you threw something inside the bowl.
Always remember that even a tissue paper will be clogged inside the toilet.
Never throw anything inside.
· Slow tank fill When you notice that the tank is filling very slowly, there can be problems with the adjustments within the water flow of the tank.
It can be because the builder kept it that way.
This is really a minor problem.
· Dripping tank filling When you hear the tank dripping after it has been filled, and it happens for a few times, it might be that the water flow inside the tank drops down into the tube without having the tube enter the tube.
Just make sure to check the tubing inside.
It can be the cause of the problem.
Those are the most common toilet problems we can encounter inside our bathrooms.
Always remember to check all the possible cause of the problems before trying to call on the repair man.
They may be really light problems that you can fix by yourself.